Print your own wood laminate dollhouse flooring

Here are some printable wooden laminate doll house floors for you... after printing them you can do one of two things:

1. Print, cover with clear vinyl laminate (like Contact Paper), trim, and glue to your floor.
2. Print, spray several coats of clear acrylic sealer, trim, and glue to your floor.




22 comments:

  1. These floors look really nice! Would we be allowed to sell our dollhouse if we used this flooring in it?

    ReplyDelete
  2. Yes, definitely... we just don't want you printing them out and selling sheets of flooring for profit.

    ReplyDelete
  3. And by the way, thank you for asking!

    ReplyDelete
  4. Okay, cool! Thanks for making these available!

    ReplyDelete
  5. Thank you so much for providing such beautiful flooring downloads. I printed both the wood and linoleum flooring on glossy photo paper and they look so amazing ...and totally real. Thanks again.

    ReplyDelete
  6. I want to put them in my daughters house whats the best way to print them to ensure they can take some wear!

    ReplyDelete
  7. Both methods mentioned above work well (clear vinyl laminate and sprayed on acrylic sealer).

    If you choose the acrylic sealer route, do several coats. And go easy on the first couple coats so the colors don't bleed together.

    Personally I think the clear vinyl laminate is more washable, if you're worried about the floor getting sticky.

    The front edge is the most important to get glued down good as that's where the most wear is.

    ReplyDelete
  8. This is my first dollhouse. Do I print several sheets and then make it fit? Thank you.

    ReplyDelete
  9. If one sheet isn't big enough, then yes, print as many as you need. Have fun :)

    ReplyDelete
  10. Could you tell me the best product you've found to adhere the paper to the floor?

    This is a wonderful option as opposed to the really expensive wood floor sheets! Thanks so much!!

    ReplyDelete
  11. I've always used Alene's Tacky Glue, but I'm sure there are others that work too. Smear a thin but consistent layer on the dollhouse floor first, then position the flooring on top. If any bubbles appear you can usually work them gently to the closest edge. I would NOT use a watery glue as it will absorb into your ink jet printed page and blur the ink.

    ReplyDelete
  12. What type of paper should you or can you print on for best result?

    ReplyDelete
  13. Use whichever paper type prints the nicest with your printer... With ours (HP inkjet) I usually use the heavy matte everyday paper - making sure to change your printer settings to "best" for the print quality. Hope this helps, and have fun!

    ReplyDelete
    Replies
    1. Thank you, I guess I will have to experiment with my Canon printer.

      Delete
  14. Help! What am I doing wrong? Each time I try to print a wood flooring pattern, it is superimposed over part of the first page. I can't get a print of just the flooring.

    ReplyDelete
  15. If you are using a computer you can "right click" and save the image to your hard drive and print just that file...

    If you are using an iOS device, tap and hold on the picture and save to camera roll and print from the camera roll.

    If you are using an android device, save it to the camera roll (I think it is the same as above - tap and hold and save image).

    ReplyDelete
    Replies
    1. Thank you so much.. I followed your suggestion and was able to get a clear copy.

      Delete
  16. You're welcome! Glad it worked.

    ReplyDelete
  17. What scale was this floor? I need wooden flooring paper that will be small scale enough for 1:36 inch scale. Would the slats be too large in these papers?

    ReplyDelete
  18. These floor prints are exactly what I needed! Thank you!

    ReplyDelete
  19. Thank you so much for these floors. I love them!

    ReplyDelete

Questions or Comments? We'd love to hear from you! While we allow anyone to comment, we moderate the comments first, so may or may not post them. Thank you!