Make your own lighted wooden dollhouse, furniture, and miniature accessories. Plus fast, easy, and simple doll house decorating ideas, tips, and downloads!
Print your own wood laminate dollhouse flooring
Here are some printable wooden laminate doll house floors for you... after printing them you can do one of two things:
1. Print, cover with clear vinyl laminate (like Contact Paper), trim, and glue to your floor.
2. Print, spray several coats of clear acrylic sealer, trim, and glue to your floor.
Thank you so much for providing such beautiful flooring downloads. I printed both the wood and linoleum flooring on glossy photo paper and they look so amazing ...and totally real. Thanks again.
I've always used Alene's Tacky Glue, but I'm sure there are others that work too. Smear a thin but consistent layer on the dollhouse floor first, then position the flooring on top. If any bubbles appear you can usually work them gently to the closest edge. I would NOT use a watery glue as it will absorb into your ink jet printed page and blur the ink.
Use whichever paper type prints the nicest with your printer... With ours (HP inkjet) I usually use the heavy matte everyday paper - making sure to change your printer settings to "best" for the print quality. Hope this helps, and have fun!
Help! What am I doing wrong? Each time I try to print a wood flooring pattern, it is superimposed over part of the first page. I can't get a print of just the flooring.
What scale was this floor? I need wooden flooring paper that will be small scale enough for 1:36 inch scale. Would the slats be too large in these papers?
Questions or Comments? We'd love to hear from you! While we allow anyone to comment, we moderate the comments first, so may or may not post them. Thank you!
These floors look really nice! Would we be allowed to sell our dollhouse if we used this flooring in it?
ReplyDeleteYes, definitely... we just don't want you printing them out and selling sheets of flooring for profit.
ReplyDeleteAnd by the way, thank you for asking!
ReplyDeleteOkay, cool! Thanks for making these available!
ReplyDeleteThank you so much for providing such beautiful flooring downloads. I printed both the wood and linoleum flooring on glossy photo paper and they look so amazing ...and totally real. Thanks again.
ReplyDeleteI want to put them in my daughters house whats the best way to print them to ensure they can take some wear!
ReplyDeleteBoth methods mentioned above work well (clear vinyl laminate and sprayed on acrylic sealer).
ReplyDeleteIf you choose the acrylic sealer route, do several coats. And go easy on the first couple coats so the colors don't bleed together.
Personally I think the clear vinyl laminate is more washable, if you're worried about the floor getting sticky.
The front edge is the most important to get glued down good as that's where the most wear is.
This is my first dollhouse. Do I print several sheets and then make it fit? Thank you.
ReplyDeleteIf one sheet isn't big enough, then yes, print as many as you need. Have fun :)
ReplyDeleteCould you tell me the best product you've found to adhere the paper to the floor?
ReplyDeleteThis is a wonderful option as opposed to the really expensive wood floor sheets! Thanks so much!!
I've always used Alene's Tacky Glue, but I'm sure there are others that work too. Smear a thin but consistent layer on the dollhouse floor first, then position the flooring on top. If any bubbles appear you can usually work them gently to the closest edge. I would NOT use a watery glue as it will absorb into your ink jet printed page and blur the ink.
ReplyDeleteThanks so much!
ReplyDeleteWhat type of paper should you or can you print on for best result?
ReplyDeleteUse whichever paper type prints the nicest with your printer... With ours (HP inkjet) I usually use the heavy matte everyday paper - making sure to change your printer settings to "best" for the print quality. Hope this helps, and have fun!
ReplyDeleteThank you, I guess I will have to experiment with my Canon printer.
DeleteHelp! What am I doing wrong? Each time I try to print a wood flooring pattern, it is superimposed over part of the first page. I can't get a print of just the flooring.
ReplyDeleteIf you are using a computer you can "right click" and save the image to your hard drive and print just that file...
ReplyDeleteIf you are using an iOS device, tap and hold on the picture and save to camera roll and print from the camera roll.
If you are using an android device, save it to the camera roll (I think it is the same as above - tap and hold and save image).
Thank you so much.. I followed your suggestion and was able to get a clear copy.
DeleteYou're welcome! Glad it worked.
ReplyDeleteWhat scale was this floor? I need wooden flooring paper that will be small scale enough for 1:36 inch scale. Would the slats be too large in these papers?
ReplyDeleteThese floor prints are exactly what I needed! Thank you!
ReplyDeleteThank you so much for these floors. I love them!
ReplyDelete